Product Description and Uses:
Schwartz Premium ABS Cement is used for bonding ABS to ABS pipes for non-pressure applications such as DWV and pipe fittings.
CSA certified for ABS non-pressure applications.
Standard Container Sizes
– 473 ml Dauber
– 946 ml Dauber
– 3.78 Litre Screw Top
|Density:||0.86 – 0.88 g/ml|
|Weight Solids:||26 – 29%|
|Viscosity:||700 – 800 cps Brookfield LV|
|Lap Shear:||800 psi (5.5MPa) at 48 hrs per ASTM D 2235|
|Shelf Life:||3 years unopened|
|Suggested Uses:||For ABS to ABS non-pressure applications such as drain, waste and vent pipes and fittings.|
|Application Tools:||Dauber or brush.|
Material Safety and Technical Data Sheets for Download
Handle newly assembled joints carefully until cement has gone through its set period.
Recommended set time is temperature dependent:
– Minimum 30 minutes at 15ºC to 38ºC
– Minimum 1 hour at 7ºC to 15ºC
– Minimum 2 hours at 0ºC to 4ºC
|Test Pressures For Pipe Sizes 1⁄2″ to 1-1⁄4″||Test Pressures For Pipe Sizes 1-1⁄2″ to 3″||Test Pressures For Pipe Sizes 3-1⁄2″ to 8″|
|Temperature Range During Cure Period||Up to 180 psi||Above 180 to 370 psi||Up To 180 psi||Above 180 To 315 psi||Up To 180 psi||Above 180 To 315 psi|
|15°C – 38°C||1 hr.||6 hr||2 hr.||12 hr.||8 hr.||24 hr.|
|4°C – 15°C||2 hr.||12 hr.||4 hr.||24 hr.||16 hr.||48 hr.|
Store indoor at room temperature, away from heat, ignition sources, open flames and direct sunlight.
Avoid open flames, turn off all pilot lights, ensure that work area is properly ventilated.
Soiled rags and waste products may contain combustible liquids or vapours and SPONTANEOUSLY COMBUST, dispose in accordance with local regulations.
Refer to MSDS for information on safe use of this product.
Plumbing Product Selector Table
Don’t see the cement you need? Call Customer Service at 800-888-8312.