C11 Multi-use Solvent Cement

10C11

Product Description and Uses:

The Schwartz C11 Multi-Use Cement is used for bonding PVC, CPVC and ABS pipes, fittings and rigid surfaces.

Standard Container Sizes

– 118 ml Dauber

Physical Properties:
Density: 0.91 – 0.93 g/ml
Weight Solids: 14 – 16%
Flashpoint: -17°C
Hydrostatic Burst Strength: 400 psi (23°C); 200
psi (82°C) per ASTM F 493
Appearance: Clear liquid
Shelf Life: 12 months unopened
Suggested
Uses:		 For PVC, CPVC and ABS plastic pipes, fittings and rigid surfaces.
Application
Tools:		 Dauber or brush.
Clean-up
Solvent:		 VC100
Pot
Life:		 NA

Safety and Technical Data Sheets for Download

TDS

TDS 10C11 – C11 Multi-use Solvent Cement (pdf)

SDS

SDS 10C11 – C11 Clear Multi-use Cement (pdf)
SDS 10C11 – C11 Clear Multi-use Cement (pdf – French)

Set Times:

Handle newly assembled joints carefully until cement has gone through its set period.

Recommended set time is temperature dependent:
– Minimum 30 minutes at 15ºC to 38ºC
– Minimum 1 hour at 7ºC to 15ºC
– Minimum 2 hours at 0ºC to 4ºC

Cure Times:
Test
Pressures For Pipe Sizes 1⁄2″ to 1-1⁄4″		 Test
Pressures For Pipe Sizes 1-1⁄2″ to 3″		 Test
Pressures For Pipe Sizes 3-1⁄2″ to 8″
Temperature
Range
During Cure Period		 Up to 180
psi		 Above 180
to 370 psi		 Up To 180
psi		 Above 180
To 315 psi		 Up To 180
psi		 Above 180
To 315 psi
15°C
– 38°C		 1 hr. 6 hr 2 hr. 12 hr. 8 hr. 24 hr.
4°C
– 15°C		 2 hr. 12 hr. 4 hr. 24 hr. 16 hr. 48 hr.

Storage:

Store indoor at room temperature, away from heat, ignition sources,
open flames and direct sunlight.

Warning:

Avoid open flames, turn off all pilot lights, ensure that work
area is properly ventilated.

Soiled rags and waste products may contain combustible liquids
or vapours and SPONTANEOUSLY COMBUST, dispose in accordance with
local regulations.

Refer to SDS for information on safe use of this product.

Plumbing Product Selector Table

Plumbing Product Selector Table

Don’t see the cement you need? Call Customer Service at 800-888-8312.