Mechanical Cleanout Test Plugs

Product Description

The new Test-Tite® Mechanical Cleanout Test Plugs are designed for use in a cleanout to test up to 40 vertical feet of pipe. No tools or equipment are required for a quick installation. With its clear cap, water can be released without splashing out of the cleanout. The Mechanical Cleanout Test Plug is the latest innovation in the Test-Tite series.

Features

  • Clear cap provides a “window” to monitor the test media as it drains
  • Expandable rubber gasket provides air and water tight seal
  • Durable design; plated steel parts will not rust
  • No tools, hoses, or gauges are required for installation
  • Hand tighten in seconds
  • Available in 2, 3, 4, and 6-inch diameters
  • 6" version contains drain line with key to control drainage of the test media
  • California Residents: WARNING – www.P65warnings.ca.gov

Mechanical Cleanout Test Plugs

Nominal
Size
Product
Code
Product description Cubic ft/Case Lbs/Case Units/
Case
2″ 83656 2″ Mechanical Cleanout
Test Plug for Plastic Pipe – Bulk Pack
0.36 3.8 6
2″ 83649 2″ Mechanical Cleanout
Test Plug for Cast Iron Pipe – Bulk Pack
0.36 3.8 6
3″ 83657 “Mechanical Cleanout
Test Plug – Bulk Pack
0.48 5.8 6
4″ 83658 “Mechanical Cleanout
Test Plug – Bulk Pack
0.56 7.1 6
6″ 83659 6″ Mechanical Cleanout
Test Plug for Plastic Pipe
1
6″ 83660 6″ Mechanical Cleanout
Cast Iron Pipe
1
3″ 83666 4” Mechanical Cleanout
Test Plug Fits Inside 3” Pipe
0.56 6.72 6

Mechanical Cleanout Test Plug Accessories

Nominal
Size
Product
Code
Product description Cubic ft/Case Lbs/Case Units/
Case
2″ 90442 2″ rubber seal only
for MCO2 plug
0.5 1 1
2″ 90446 2″ rubber seal only
for MCO2CI plug
0.5 1 1
3″ 90443 3″ rubber seal only
for MCO3 plug
0.5 1 1
4″ 90444 4″ rubber seal only
for MCO4 plug
0.5 1 1
6″ 90447 6″ rubber seal only
for MCO6 plug
0.5 1 1
6″ 90448 6″ rubber seal only
for MCO6CI plug
0.5 1 1
90445 Pop-It seal only
for 2″, 3″, and 4″
0.5 1 1

Patent #8,042,576

Don’t see the product you need? Call Customer Service at 800-888-8312.