Twist N' Seal®

Features
Stop water flow while soldering or cementing pipe fittings!
Holds up to 60 psig
Quick and easy to use!
Simple to change sizes - just unscrew rubber seal and replace
NO TOOLS REQUIRED!
Comes individually or in a kit

 

Deployment Tool

Product Code Description Units/
Case
Lbs./
Case
83782 1/2” Twist ‘N Seal Tool 6 2.20
83783 3/4” Twist ‘N Seal Tool 6 2.42
83784 1” Twist ‘N Seal Tool 6 2.75
83787 1 1/4” Twist ‘N Seal Tool 1 1.93
83788 1 1/2” Twist ‘N Seal Tool 1 1.97
83789 2” Twist ‘N Seal Tool 1 2.14
83785 1/2” – 1”
Twist ‘N Seal Kit
6 3.19
83790 1 1/4” – 2”
Twist ‘N Seal Kit
1 4.10
83791 1/2” – 2”
Twist ‘N Seal Kit
1 4.50
97470 1/2” Replacement Seal 6 0.21
97471 3/4” Replacement Seal 6 0.36
97472 1” Replacement Seal 6 0.69
97528 1 1/4” Replacement Seal 1 0.18
97529 1 1/2” Replacement Seal 1 0.22
97530 2” Replacement Seal 1 0.40
97543 Carrying Case 1 2.00


Instructions for use:

  • Turn off water supply and drain pressure from system.
  • Screw on rubber seal (A) for the desired size of pipe (1/2”, 3/4” or 1”)
  • Hold the handle in the right angle position (B) and tighten the rubber seal until it just slides in the pipe.
  • Lift the handle to the straight position (C) to seal in pipe.

If more sealing pressure is needed return the handle to the right angle position, tighten the rubber seal clockwise one turn.  Return the handle to the straight (C) position.

Twist N Seal

 

Don't see the product you need? Call Customer Service at 800-888-8312.

 
Site Map  |  Careers  |  Industry Links  |  Limited Warranty  |  IPS Canada  |  About IPS Corporation

All materials © IPS® Corporation .